The Meditric SSWFB-6 Single Sensor Based Radiant Heat Warmer is a microprocessor-based neonatal radiant warmer designed for controlled infant temperature management. It provides skin and manual temperature control, supported by a 600W ceramic/quartz heater, digital temperature display, and audio-visual safety alarms.
The warmer features a PT 100 temperature probe, PU foam pressure mattress, round fiber baby bed tray, telescopic stainless-steel IV stand, and 100 mm PU wheels for convenient mobility.
✅ Key Features
- Single sensor microprocessor-based radiant heat warmer
- Skin and manual temperature control
- 600W ceramic/quartz heater
-
Skin temperature setting: 32°C to 37°C
-
Display setting range: 28°C to 40°C
- PT 100 temperature probe
- Audio and visual alarms
- Power failure, high-temperature, low-temperature and sensor-failure alarms
- Optional heater-failure alarm
- Heater cutoff from 0–100% in 10% intervals
- PU foam pressure mattress
- Round fiber baby bed tray
- Optional Upgar Timer
- Telescopic stainless-steel IV stand
- 100 mm PU wheels with 2 brakes and 2 plain wheels
Temperature Control System
The SSWFB-6 uses a microprocessor-based skin and manual temperature control system. The skin temperature setting range is 32°C to 37°C, while the display setting range is 28°C to 40°C.
A PT 100 temperature probe is specified for temperature sensing.
600W Ceramic / Quartz Heater
The radiant warmer is equipped with a 600W ceramic/quartz heater. Heater output can be controlled from 0% to 100% in 10% intervals, allowing graduated heater control according to the selected operating mode.
Audio-Visual Alarm System
The SSWFB-6 incorporates audio and visual alarms for important operating conditions:
| Alarm |
Indication |
| Power failure |
Audio / Visual |
| Temperature high |
Audio / Visual |
| Temperature low |
Audio / Visual |
| Heater failure |
Audio / Visual — Optional |
| Sensor failure |
Audio / Visual |
Baby Bed & Mattress
The warmer includes a pressure PU foam mattress and a round fiber baby bed tray. The baby bed configuration is designed as part of the warmer's neonatal care setup.
Mobility & Accessories
-
IV Stand: Telescopic stainless steel
-
Wheels: 100 mm PU sole
-
Wheel configuration: 2 brake wheels + 2 plain wheels
-
Upgar Timer: Optional
Technical Specifications
| Specification |
Details |
| Product |
Single Sensor Based Radiant Heat Warmer |
| Model |
SSWFB-6 |
| Control System |
Microprocessor-based skin & manual temperature control |
| Heater |
Ceramic / Quartz |
| Heater Power |
600W |
| Skin Temperature Setting |
32°C to 37°C |
| Display Setting Range |
28°C to 40°C |
| Temperature Probe |
PT 100 |
| Power Failure Alarm |
Audio / Visual |
| High Temperature Alarm |
Audio / Visual |
| Low Temperature Alarm |
Audio / Visual |
| Heater Failure Alarm |
Audio / Visual, optional |
| Sensor Failure Alarm |
Audio / Visual |
| Mattress |
Pressure PU Foam |
| Baby Bed |
Round Fiber Tray |
| Upgar Timer |
Optional |
| IV Stand |
Telescopic Stainless Steel |
| Heater Cutoff |
0–100%, in 10% intervals |
| Wheels |
100 mm PU Sole |
| Brakes |
2 Brake + 2 Plain |
Product Disclaimer
Specifications and included accessories may vary by production batch, market, or manufacturer revision. Please verify the exact configuration with the seller before purchase. This product information is intended for general product guidance and does not replace professional medical advice, diagnosis, or treatment.
