The Vertical Autoclave Wing Nut Locking Single Wall is a compact vertical steam sterilizer designed for routine sterilization applications in laboratories, healthcare facilities and other professional environments. It is available in 40-litre and 80-litre capacities and uses an immersion-type heater with a wing-nut locking system.
The unit features single-wall and SS GMP construction, a jointless silicone rubber gasket and a design intended for easy operation and low maintenance. The supplied specification states a working pressure of 1.2 kgf/cm² (15–17 psi) and a sterilization time of 60–70 minutes.
✅ Key Features
- Vertical single-wall autoclave
- Available in 40L and 80L capacities
- Immersion-type heater
- Single-wall & SS GMP construction
- Wing-nut locking system
- Jointless silicone rubber gasket
- Easy operation
- Low maintenance
- NABL standards compliance stated in the supplied source
- Sterilization drums available at additional cost
- 40L heater load: 2.00 kW
- 80L heater load: 4.00 kW
- Working pressure: 1.2 kgf/cm² (15–17 psi)
- Sterilization time: 60–70 minutes
Single-Wall Construction
The autoclave uses a single-wall construction with SS GMP construction, as specified in the supplied product information.
The single-wall design provides a straightforward configuration for routine steam sterilization applications.
Wing-Nut Locking
A wing-nut locking system is provided to secure the autoclave during operation.
The jointless silicone rubber gasket provides the specified sealing arrangement between the lid and chamber.
Immersion-Type Heating
The sterilizer uses an immersion-type heater.
The available heater loads are:
-
40L model: 2.00 kW
-
80L model: 4.00 kW
Sterilization Pressure & Time
The supplied specification gives a working pressure of:
1.2 kgf/cm² (15–17 psi)
The listed sterilization time is:
60–70 minutes
Model & Technical Specifications
| Specification |
40 Liter |
80 Liter |
| Internal Tank Capacity |
40 L |
80 L |
| Heater Load |
2.00 kW |
4.00 kW |
| Chamber Dimension |
300 × 550 mm |
400 × 600 mm |
| Working Pressure |
1.2 kgf/cm² (15–17 psi) |
Same specification supplied |
| Sterilization Time |
60–70 min |
60–70 min |
| Construction |
Single wall & SS GMP |
Single wall & SS GMP |
| Heater Type |
Immersion type |
Immersion type |
| Gasket |
Jointless silicone rubber |
Jointless silicone rubber |
| Locking |
Wing nut |
Wing nut |
| Power Supply |
220V / 440V |
220V / 440V |
Product Disclaimer
Specifications and included accessories may vary by production batch, market, or manufacturer revision. Please verify the exact configuration with the seller before purchase. This product information is intended for general product guidance and does not replace professional medical advice, diagnosis, or treatment.
